COARSE AGGREGATE TEST
- Sieve analysis -IS 2386:1963(RA 2011)-Part -1
- Flakiness Index -IS 2386:1963(RA 2011)-Part -1
- Elongation Index- IS 2386:1963(RA 2011)-Part -1
- Specific Gravity- IS 2386:1963(RA 2011)-Part -3
- Water Absorption- IS 2386:1963(RA 2011)-Part -3
- Bulk Density- IS 2386:1963(RA 2011)-Part -3
- Aggregate crushing strength- IS 2386:1963(RA 2011)-Part -4
- Aggregate Impact value -IS 2386:1963(RA 2011)-Part -4
- Ten percent fine value- IS 2386:1963(RA 2011)-Part -4
FINE AGGREGATE TESTS​
- Sieve analysis- IS 2386:1963(RA 2011)-Part
- Specific Gravity- IS 2386:1963(RA 2011)-Part -1
- Water Absorption- IS 2386:1963(RA 2011)-Part -3
- Bulk Density- IS 2386:1963(RA 2011)-Part -3
- Materials finer than 75Micron- IS 2386:1963(RA 2011)-Part -1
SOIL TESTS
- Wet Sieve Analysis- IS 2720: 1985(RA2010)Part 5
- Light compaction- IS 2720: 1985(RA2010)Part 7
- Heavy Compaction- IS 2720: 1985(RA2010)Part 8
- Free Swell Index- IS 2720: 1985(RA2010)Part 40
- CBR test
- Moisture content
BITUMEN TESTS
- Penetration Test- IS 1203: 1978
- Softening Point- IS 1205: 1978
- Ductility- IS 1208: 1978
- Viscosity- IS 1206:1978
- Flash and Fire- IS 1209:1978
- Bitumen Extraction (ASTM D 2172)
- Marshal Stability (ASTM D 6927)
- Specific gravity
- Water content
CEMENT TESTS
- Fines by Dry sieving- IS 4031:1996(RA 2010)-Part-1
- Fines by Air Permeability Method- IS 4031:1999(RA 2008)-Part-2
- Soundness- IS 4031:1988(RA 2010)-Part-3
- Consistency -IS 4031:1988(RA 2009)-Part-4
- Setting Time -IS 4031:1988(RA 2009)-Part-5
- Compressive Strength- IS 4031:1988(RA 2009)-Part-6
CC CUBE TEST
- Dimensions IS 2185:2005(RA2010) Part 1
- Compressive Strength IS 2185:2005(RA2010) Part 1
- Water Absorption IS 2185:2005(RA2010) Part 1
- Block Density IS 2185:2005(RA2010) Part 1
CC BLOCK TEST
- Compressive Strength: IS 516: 1959(RA2008)
BRICK TEST
- Dimensions- IS 1077: 1992(RA 2011)
- Compressive Strength -IS3495: 1992(RA 2011) Part 1
- Water Absorption- IS3495: 1992(RA 2011) Part 2
- Efflorescence- IS3495: 1992(RA 2011) Part 3
STEEL TEST
- Tensile Test
- Bend and re bend test
- Proof Stress
- Percentage of Elongation
- Weight per RMT
WET MIX MACADEM
- Aggregate impact value
- Liquid limit
- Plastic Limit
- Shape test
- Density By Sand Replacement Method
- Density By Core cutter Method
- Aggregate Gradation